8 Possible Ways to Fix a Honeywell Thermostat That Won’t Turn On The Heat

If your Honeywell thermostat is not turning on the heat, it can be frustrating and leave you feeling cold in your own home. There are several possible reasons why your thermostat may not be turning on the heat, and fortunately, many of them can be easily fixed by following a few simple troubleshooting steps.

In this article, we will go through 8 possible solutions for fixing a Honeywell thermostat that won’t turn on the heat.

Whether you are experiencing issues with the power supply, the furnace, or the thermostat itself, we have tips and guidance to help you get your heat back on and your home feeling warm and comfortable again.

How to Fix Honeywell Thermostat Won’t Turn On Heat

Check the power supply

Make sure the thermostat is receiving power. You can check the batteries or ensure that the thermostat is properly connected to the electrical system.

There are a few different ways to do this:

  • Check the batteries: If your thermostat uses batteries, make sure they are properly installed and have a sufficient charge. If the batteries are low or dead, the thermostat will not be able to function properly.
  • Check the electrical connection: If your thermostat is hardwired into your electrical system, make sure it is properly connected and receiving power. You can do this by checking the circuit breaker or fuse box to see if the circuit for the thermostat has been tripped or blown.
  • Check the display: If the thermostat has a display, see if it is functioning properly. If the display is blank or not working, this could indicate a problem with the power supply.

If the power supply appears to be functioning properly and you have checked all of these things, move on to the next troubleshooting step.

Check the furnace

If the power supply to the thermostat is working properly and the thermostat itself is set to “Heat,” but the furnace is not turning on, this could be the issue. Here are a few things to check:

  • Make sure the furnace is turned on: This may seem obvious, but it is always worth double-checking.
  • Check the thermostat settings: Make sure the thermostat is set to “Heat” and that the temperature is set higher than the current room temperature.
  • Check the furnace filter: A dirty or clogged filter can prevent the furnace from functioning properly. Replace the filter if it is dirty or clogged.
  • Check for any error codes or messages: Some furnaces will display an error code or message if there is a problem. Refer to the owner’s manual or the manufacturer’s website to determine what the error code or message means and how to fix it.

If the furnace appears to be functioning properly and you have checked all of these things, move on to the next troubleshooting step.

Check the thermostat settings

It is important to make sure that the thermostat is set to “Heat” and that the temperature is set higher than the current room temperature. If the thermostat is set to “Off” or “Cool,” it will not turn on the heat, even if the furnace is functioning properly.

Similarly, if the temperature is set lower than the current room temperature, the thermostat will not turn on the heat because it will think the room is already at the desired temperature.

To check the thermostat settings:

  • Locate the thermostat and look for the “Heat/Cool” switch. Make sure it is set to “Heat.”
  • Look for the temperature setting. Make sure it is set higher than the current room temperature.
  • If you are using a programmable thermostat, make sure it is set to the correct time and day.

If the thermostat settings are correct and you have checked all of these things, move on to the next troubleshooting step.

Check the thermostat location

The thermostat should be located in a place where it can accurately sense the temperature of the room. If it is located in a drafty area or near a heat source, it may not be accurately sensing the temperature and may not turn on the heat.

Here are a few things to consider when selecting the location for your thermostat:

  • Avoid placing the thermostat near a window, door, or outside wall, as these areas are more prone to temperature fluctuations.
  • Avoid placing the thermostat near a heat source, such as a radiator or fireplace, as this can cause the thermostat to think the room is warmer than it actually is.
  • Avoid placing the thermostat in direct sunlight or near a lamp, as these can also affect the temperature reading.
  • Make sure the thermostat is at a comfortable height for you to reach and operate.

If the thermostat location is not the issue and you have checked all of these things, move on to the next troubleshooting step.

Check the thermostat wiring

If the thermostat is not properly wired, it will not function correctly and may not turn on the heat. It is important to make sure the thermostat is properly wired according to the manufacturer’s instructions.

Here are a few things to check:

  • Make sure all of the wires are securely connected to the thermostat and the furnace.
  • Check for any loose or frayed wires. If you find any, have a professional repair or replace them.
  • Make sure the wires are connected to the correct terminals. Refer to the manufacturer’s instructions or wiring diagram to ensure the wires are connected correctly.
  • If you are not comfortable working with electrical wiring, it is recommended to have a professional check the wiring to ensure it is safe and correct.

If the wiring appears to be functioning properly and you have checked all of these things, move on to the next troubleshooting step.

Check for a tripped circuit breaker or blown fuse

If the circuit breaker or fuse for the furnace has been tripped or blown, the furnace will not turn on. Reset the circuit breaker or replace the fuse as needed.

To check for a tripped circuit breaker or blown fuse:

  • Locate the circuit breaker or fuse box.
  • Check to see if any of the circuit breakers are in the “off” position or if any of the fuses are blown.
  • If you find a tripped circuit breaker, flip it back to the “on” position. If you find a blown fuse, replace it with a new one of the same amperage rating.
  • If you are not comfortable working with electrical systems, it is recommended to have a professional check and repair the circuit breaker or fuse box.

If the circuit breaker or fuse is not the issue and you have checked all of these things, move on to the next troubleshooting step.

Check for blocked air registers

If the air registers are blocked, the furnace may not be able to circulate enough warm air to heat the room, causing the thermostat to not turn on the heat.

To check for blocked air registers:

  • Locate all of the air registers in your home. These are the vents that allow warm or cool air to flow into the room.
  • Make sure all of the air registers are open and unobstructed. Do not cover them with furniture, curtains, or other objects.
  • If any of the air registers are blocked or partially blocked, move the obstructing objects to allow for proper airflow.
  • If you have any forced air heating or cooling systems, make sure the air filter is clean and not clogged. A dirty or clogged air filter can prevent the system from circulating enough warm or cool air.

Have a professional check the thermostat

If you have tried all of these troubleshooting steps and the thermostat still won’t turn on the heat, it may be a problem with the thermostat itself. In this case, it is recommended to have a professional check and repair the thermostat.

Why is my Honeywell thermostat not responding?

There are several possible reasons why your Honeywell thermostat may not be responding:

  1. Power supply issues: If the thermostat is not receiving power, it will not be able to function. Make sure the thermostat is properly connected to the electrical system or has fresh batteries.
  2. Wiring issues: If the thermostat is not properly wired, it will not be able to function correctly. Check the wiring to make sure all of the wires are securely connected and properly positioned.
  3. Thermostat location: The thermostat should be located in a place where it can accurately sense the temperature of the room. If it is located in a drafty area or near a heat source, it may not be accurately sensing the temperature and may not respond as expected.
  4. Thermostat settings: Make sure the thermostat is set to the correct mode (Heat or Cool) and that the temperature is set appropriately.
  5. Furnace issues: If the furnace is not functioning properly, the thermostat will not be able to turn on the heat. Check the furnace to make sure it is turned on and functioning properly.
  6. Blocked air registers: If the air registers are blocked, the furnace may not be able to circulate enough warm or cool air to heat or cool the room. Make sure all air registers are open and unobstructed.

How long does it take for the heat to turn on with Honeywell thermostat?

The amount of time it takes for the heat to turn on with a Honeywell thermostat will depend on several factors, including the type of heating system you have, the temperature difference between the current room temperature and the desired temperature, and the size of your home.

For example, if you have a forced air heating system and the temperature difference is small (for example, you are trying to raise the temperature from 68 degrees to 70 degrees), it may only take a few minutes for the heat to turn on and start warming the room.

However, if you have a large home or a heating system with a slower response time (such as a boiler), it may take longer for the heat to turn on and start warming the room. In these cases, it may take anywhere from 10 to 30 minutes or more for the heat to turn on and start warming the room.

It is also important to note that if the thermostat is not properly functioning or the heating system is not working properly, the heat may not turn on at all. In this case, it is important to troubleshoot and resolve any issues with the thermostat or heating system to get the heat back on.

Conclusion

if your Honeywell thermostat won’t turn on the heat, there are several possible reasons and several possible solutions. By following the troubleshooting steps outlined in this article, you should be able to identify the cause of the problem and take the necessary steps to fix it.

Whether the issue is with the power supply, the furnace, the thermostat settings, the thermostat location, the thermostat wiring, a tripped circuit breaker or blown fuse, or blocked air registers, there are steps you can take to troubleshoot and resolve the issue.

If you have tried all of these troubleshooting steps and the thermostat is still not turning on the heat, it is recommended to have a professional check and repair the thermostat.

Leave a Comment